Verified Solution • 2025–26 Session moderate

QP 273-275: Q34: HC Verma: Concepts of Physics - Volume 1 Chapter-13 Fluid Mechanics P 273-275: Q34 Solution: Water leaks out from an open tank through a hole of area 2 mm ² …

⚠️ Common Exam Traps & Conceptual Pitfalls

When setting up the rate of change of height, remember that the volume lost is negative: $dV=-A,dh$. Thus $dh/dt=-(a/A)sqrt{2gh}$. Forgetting the minus sign or swapping the limits in the integral leads to an incorrect time. Always keep track of the sign so that the integral $int_{h_0}^{h_1}!dh/sqrt{h}=2(sqrt{h_1}-sqrt{h_0})$ is evaluated with the correct order, yielding $t=(A/asqrt{2g}),2(sqrt{h_0}-sqrt{h_1})$.

Water leaks out from an open tank through a hole of area 2 mm22 \text{ mm}^2 in the bottom. Suppose water is filled up to a height of 80 cm and the area of cross section of the tanks is 0.4 m20.4 \text{ m}^2. The pressure at the open surface and at the hole are equal to the atmospheric pressure. Neglect the small velocity of the water near the open surface in the tank. (a) Find the initial speed of water coming out of the hole. (b) Find the speed of water coming out when half of water has leaked out. (c) Find the volume of water leaked out using a time interval dtdt after the height remained is hh. Thus find the decrease in height dhdh in terms of hh and dtdt. (d) From the result of part (c) find the time required for half of the water to leak out.

Step-by-Step Verified Solution

**Answer:** (a) v=4v = 4 m/s (b) v=2.83v = 2.83 m/s (c) dh=−aA2gh dtdh = -\frac{a}{A}\sqrt{2gh} \, dt (d) t=160t = 160 s **Step-by-Step Explanation (Verified):** Given: hole area a=2a = 2 mm_ = 2×10−62 \times 10^{-6} m_, tank area A=0.4A = 0.4 m_, initial height = 80 cm. (a) Initial speed (Torricelli's law):
v=2gh=2×10×0.8=4 m/sv = \sqrt{2gh} = \sqrt{2 \times 10 \times 0.8} = 4 \text{ m/s}
(b) When half leaked, h=0.4h = 0.4 m:
v=2×10×0.4=2.83 m/sv = \sqrt{2 \times 10 \times 0.4} = 2.83 \text{ m/s}
(c) Volume leaked in time dt:
dV=av dt=a2gh dtdV = a v \, dt = a\sqrt{2gh} \, dt
−A dh=a2gh dt⇒dh=−aA2gh dt-A \, dh = a\sqrt{2gh} \, dt \Rightarrow dh = -\frac{a}{A}\sqrt{2gh} \, dt
(d) Time for half to leak:
t=∫0.80.4−Aa2gdhh=Aa2g×2(0.8−0.4)t = \int_{0.8}^{0.4} -\frac{A}{a\sqrt{2g}} \frac{dh}{\sqrt{h}} = \frac{A}{a\sqrt{2g}} \times 2(\sqrt{0.8} - \sqrt{0.4})
t=0.42×10−6×4.47×2(0.894−0.632)=160 st = \frac{0.4}{2 \times 10^{-6} \times 4.47} \times 2(0.894 - 0.632) = 160 \text{ s}
[citation:5]

All Questions in this Chapter

Related Learning Resources & Exam Preparation