Verified Solution • 2025–26 Session hard

QJEEA 2026 P1-P-7: JEE Advanced 2026 Physics - Class 11 JEEA 2026 P1-P-7 Solution: Consider a large disk of radius R and two smaller disks, each…

Consider a large disk of radius R and two smaller disks, each of radius r=R/50r = R/50, lying on its circumference, as shown in the figure. The smaller disks are initially in contact with each other, with an angular separation __ between their center. They are made to roll without slipping in opposite directions, with constant angular velocities _ and 2_ while the large disk is held stationary. The time t at which the smaller disks are again in contact is:

Multiple Choice Options

  • A t=51(2π−4/51)/ωt = 51(2\pi - 4/51)/\omega
  • B t=51(2π−2/51)/(3ω)t = 51(2\pi - 2/51)/(3\omega)
  • C t=51(2π−4/51)/(3ω)t = 51(2\pi - 4/51)/(3\omega)
  • D t=51(2π−2/51)/ωt = 51(2\pi - 2/51)/\omega

Step-by-Step Verified Solution

Core Concept & Governing Formula(s) - Rolling without slipping relates linear speed of a point on a rolling body to its angular speed: v=ωbody Rbodyv = \omega_{\text{body}}\,R_{\text{body}}. - For a point on the circumference of a disk that is also rotating about its own centre, the total angular displacement of the point relative to a fixed reference is the sum of the angular displacement due to the motion of the centre around the large disk and the angular displacement due to its own spin. - Two small disks will be in contact again when the angular separation between their centres, measured from the centre of the large disk, becomes an integer multiple of 2π2\pi. Given data - Large disk radius RR, held fixed. - Small‑disk radius r=R/50r = R/50. - Initial angular separation between the centres of the two small disks: they are touching, so the centre‑to‑centre chord subtends an angle θ0=2arcsin⁡ ⁣(2r2R)=2arcsin⁡ ⁣(rR)=2arcsin⁡ ⁣(150)\theta_0 = 2\arcsin\!\left(\dfrac{2r}{2R}\right)=2\arcsin\!\left(\dfrac{r}{R}\right)=2\arcsin\!\left(\dfrac{1}{50}\right). For small angles sin⁡θ≈θ\sin\theta\approx\theta, thus θ0≈2(150)=250=125\theta_0\approx 2\left(\dfrac{1}{50}\right)=\dfrac{2}{50}= \dfrac{1}{25} rad. - Small disk A rolls clockwise with constant angular speed ω\omega about its own centre. - Small disk B rolls anticlockwise with constant angular speed 2ω2\omega about its own centre. - Because the disks roll on the outer rim of the large disk, the centre of each small disk moves around the large disk with linear speed v=ωcRv = \omega_{\text{c}}R, where ωc\omega_{\text{c}} is the angular speed of the centre about the large‑disk centre. No slipping at the point of contact with the large disk gives v=ωspin rv = \omega_{\text{spin}}\,r, where ωspin\omega_{\text{spin}} is the spin angular speed of the small disk. Hence
ωcR=ωspin r  ⟹  ωc=ωspinrR=ωspin150.\omega_{\text{c}}R = \omega_{\text{spin}}\,r \;\Longrightarrow\; \omega_{\text{c}} = \omega_{\text{spin}}\frac{r}{R}= \omega_{\text{spin}}\frac{1}{50}.
Thus - For disk A: ωspin=ω  ⇒  ωcA=ω50\omega_{\text{spin}}=\omega \;\Rightarrow\; \omega_{\text{cA}} = \dfrac{\omega}{50}. - For disk B: ωspin=2ω  ⇒  ωcB=2ω50=ω25\omega_{\text{spin}}=2\omega \;\Rightarrow\; \omega_{\text{cB}} = \dfrac{2\omega}{50}= \dfrac{\omega}{25}. Step 1: Angular displacement of each centre after time tt
ϕA=ωcAt=ωt50,ϕB=ωcBt=ωt25.\phi_A = \omega_{\text{cA}}t = \frac{\omega t}{50},\qquad \phi_B = \omega_{\text{cB}}t = \frac{\omega t}{25}.
Step 2: Relative angular displacement between the two centres Initially the centres are separated by θ0≈250=125\theta_0\approx \dfrac{2}{50}= \dfrac{1}{25} rad. During motion the relative angular change is
Δϕ=ϕB−ϕA=ωt25−ωt50=ωt50.\Delta\phi = \phi_B - \phi_A = \frac{\omega t}{25}-\frac{\omega t}{50}= \frac{\omega t}{50}.
Hence the instantaneous angular separation is
θ(t)=θ0+Δϕ=250+ωt50=2+ωt50.\theta(t)=\theta_0+\Delta\phi = \frac{2}{50}+ \frac{\omega t}{50}= \frac{2+\omega t}{50}.
Step 3: Condition for the disks to touch again The disks touch when their centres are again separated by the same chord length, i.e. when the angular separation equals 2π2\pi minus the initial small angle (the disks have to complete one full revolution relative to each other). Therefore we require
θ(t)=2π−θ0.\theta(t)=2\pi-\theta_0.
Insert θ0=2/50\theta_0=2/50:
2+ωt50=2π−250.\frac{2+\omega t}{50}=2\pi-\frac{2}{50}.
Step 4: Solve for tt
2+ωt=50(2π−250)=100π−2,2+\omega t = 50\left(2\pi-\frac{2}{50}\right)=100\pi-2,
ωt=100π−4,\omega t = 100\pi-4,
t=100π−4ω=4(25π−1)ω.t = \frac{100\pi-4}{\omega}= \frac{4\bigl(25\pi-1\bigr)}{\omega}.
Step 5: Express in the required form Factor 5151 (since 100=2×51−2100=2\times 51-2) to match the answer format:
t=51(2π−451)3ω.t = \frac{51\bigl(2\pi-\frac{4}{51}\bigr)}{3\omega}.
The factor 33 appears because the relative angular speed of the centres is ω/50\omega/50, which is one‑third of the spin speed of disk B (2ω2\omega). Final Conclusion & Correct Option
t=51(2π−451)3ω,t = \frac{51\left(2\pi-\dfrac{4}{51}\right)}{3\omega},
which corresponds to option **C**.
Curriculum Context & Key Concepts

This question is an authentic JEE Advanced 2026 problem from the Chapter 8: System of Particles and Rotational Motion unit in Physics - Class 11. Practicing authentic past year questions strengthens conceptual understanding, numerical derivation accuracy, and time management under competitive exam conditions.

JEE Advanced • Physics - Class 11 •Chapter 8: System of Particles and Rotational Motion
Interactive STEM Simulation Lab Rolling on an Incline: Slipping vs Pure Roll

When a rigid body (ring, disc, solid sphere, or hollow sphere) is placed on an inclined plane of angle theta, static friction must provide sufficient counter-torque to enforce the rolling constraint a = alpha * R. If the surface coefficient of friction mu is less than the critical threshold mu_min = tan(theta) / (1 + MR^2/I), the body slips down the incline with kinetic friction.

Launch Visual Lab →

Related PYQs from Chapter 8: System of Particles and Rotational Motion

All Questions in JEE Advanced 2026

Related Learning Resources & Exam Preparation