Weight B with mass of 10 kg is fastened to a rope, as shown in the Figure. The distance AB is… — Applications of Laws of Motion
Weight B with mass of 10 kg is fastened to a rope, as shown in the Figure. The distance AB is constant. How heavy weight P is it necessary to choose for α = 45°, β = 60°? How big will the stress be in rope AB in this case?
Step-by-Step Verified Solution
Since the figure is not provided, we must deduce the standard physical setup from the problem description.
### **1. Problem Interpretation & Assumptions**
Based on the phrasing, the physical setup is as follows:
* **Weight B** is a point mass of m=10 kg (which exerts a downward gravitational force of W=10 kgf or 98.1 N).
* It is held in equilibrium by two ropes:
1. **Rope AB**, which makes an angle of **α=45∘** with the horizontal.
2. A second rope supporting **Weight P**, which makes an angle of **β=60∘** with the horizontal.
* Because the second rope supports Weight P, the tension in that rope is exactly equal to P.
* *"Stress in rope AB"* refers to the **tension force** (TAB) within that rope.
*(Note: In standard mechanics problems of this type, angles are measured from the horizontal unless explicitly stated otherwise. We will proceed with this assumption).*
---
### **2. Free Body Diagram & Equilibrium Equations**
Weight B is in static equilibrium, meaning the net force in both the horizontal (x) and vertical (y) directions is zero.
The three forces acting on Weight B are:
1. **Downward Weight (W):** 10 kg
2. **Tension in Rope AB (TAB):** Pulling at 45∘ above the horizontal.
3. **Tension from Weight P (P):** Pulling at 60∘ above the horizontal in the opposite direction.
**Horizontal Equilibrium (∑Fx=0):**
The horizontal components of the two tensions must cancel each other out.
TABcos(45∘)=Pcos(60∘)
**Vertical Equilibrium (∑Fy=0):**
The upward vertical components of the two tensions must support the downward weight.
TABsin(45∘)+Psin(60∘)=W
TABsin(45∘)+Psin(60∘)=10
---
### **3. Step-by-Step Mathematical Solution**
**Step 1: Express P in terms of TAB using the horizontal equation.**
Substitute the exact trigonometric values (cos45∘=22 and cos60∘=21):
TAB(22)=P(21)
Multiply both sides by 2:
P=TAB2
**Step 2: Substitute P into the vertical equation to solve for TAB.**
Substitute P=TAB2 and the sine values (sin45∘=22 and sin60∘=23) into the vertical equilibrium equation:
TAB(22)+(TAB2)(23)=10
Factor out TAB22:
TAB22(1+3)=10
Isolate TAB:
TAB=2(1+3)20
**Step 3: Rationalize the denominator for TAB.**
Multiply the numerator and denominator by (3−1):
TAB=2(1+3)(3−1)20(3−1)
TAB=2(3−1)20(3−1)=2220(3−1)=210(3−1)
Multiply by 22:
TAB=2102(3−1)=52(3−1)=5(6−2)
**Step 4: Solve for P.**
Using P=TAB2:
P=5(6−2)⋅2=5(12−2)=5(23−2)=10(3−1)
---
### **4. Final Answers**
**1. Weight P:**
* **Exact Analytical Value:** P=10(3−1) kg
* **Numerical Value:** P≈10(1.732−1)=7.32 kg *(or 71.8 N)*
**2. Stress (Tension) in rope AB:**
* **Exact Analytical Value:** TAB=5(6−2) kg
* **Numerical Value:** TAB≈5(2.449−1.414)=5.18 kg *(or 50.8 N)*
---
*Note on Angle Convention: If your specific figure measured the angles α and β from the **vertical** axis instead of the horizontal, the required weight P remains exactly the same (7.32 kg) due to the symmetry of the 45∘ angle. However, the tension in rope AB would change to TAB=5(32−6)≈8.96 kg.*
Certainly! Let's break down the problem step-by-step.
### Given & Objective
- **Given**:
- Weight B with mass mB=10 kg.
- Angles α=45∘ and β=60∘.
- The distance AB is constant.
- **Objective**:
- Determine the mass mP of weight P required to balance the system.
- Calculate the tension TAB in rope AB.
### Key Concepts & Formulae
- **Equilibrium of Forces**: For a system to be in equilibrium, the net force in all directions must be zero.
- **Tension in a Rope**: The tension in a rope is the same throughout the rope if it is massless and inextensible.
- **Trigonometric Relationships**: We will use trigonometric functions to resolve forces into components.
### Step-by-Step Solution
1. **Identify the Forces**:
- Let TAB be the tension in rope AB.
- Let TBC be the tension in rope BC.
- Let TCD be the tension in rope CD.
- The weight of B is WB=mB⋅g=10⋅9.81=98.1 N.
- The weight of P is WP=mP⋅g.
2. **Resolve Forces at Point B**:
- The forces at point B are:
- TAB along rope AB.
- TBC along rope BC.
- WB vertically downward.
- Resolve TBC into components:
- Horizontal component: TBCcos(β)
- Vertical component: TBCsin(β)
3. **Equilibrium in the Horizontal Direction**:
- The horizontal forces must balance:
TABcos(α)=TBCcos(β)
Substituting the given angles:
TABcos(45∘)=TBCcos(60∘)
TAB⋅22=TBC⋅21
TAB⋅2=TBC
TBC=TAB2
4. **Equilibrium in the Vertical Direction**:
- The vertical forces must balance:
TABsin(α)+TBCsin(β)=WB
Substituting the given angles:
TABsin(45∘)+TBCsin(60∘)=98.1
TAB⋅22+TBC⋅23=98.1
Substituting TBC=TAB2:
TAB⋅22+TAB2⋅23=98.1
TAB(22+26)=98.1
TAB(22+6)=98.1
TAB=2+698.1⋅2
Simplify the denominator:
TAB=2+6196.2
Rationalize the denominator:
TAB=(2+6)(2−6)196.2(2−6)
TAB=2−6196.2(2−6)
TAB=−4196.2(2−6)
TAB=−49.05(2−6)
Since tension cannot be negative:
TAB=49.05(6−2)
5. **Calculate TBC**:
TBC=TAB2
TBC=49.05(6−2)2
TBC=49.05(12−2)
TBC=49.05(23−2)
TBC=49.05⋅2(3−1)
TBC=98.1(3−1)
6. **Determine the Mass mP**:
- The weight WP must balance the vertical component of TBC:
WP=TBCsin(β)
WP=98.1(3−1)⋅23
WP=49.05(3−1)3
WP=49.05(3−3)
WP=49.05⋅3−49.053
WP=147.15−49.053
WP≈147.15−85.05
WP≈62.1 N
mP=gWP=9.8162.1≈6.33 kg
### Final Answer
- **Mass of weight P**: mP≈6.33 kg.
- **Tension in rope AB**: TAB≈49.05(6−2) N.
I hope this detailed solution helps you understand the problem and its solution clearly! If you have any further questions, feel free to ask.